Overview： The hot a ir enters into the bottom of the dryer in tangent direction.Under the driving of the stirrer,a powerful rotating wind area is formed.The paste s tate materials enter into the dryer through the s crew charger.Under the powerful function effect of stirring at high-speed roation,the materials a re distributed under the function of s trike,friction and shearing force.The block state materials will soon be smashed and contact the hot air fully and the materials are heated and dried.

Overview： Raw mate rial is feed into the machine from equipment inlet and move forward continuously along with the horizontal direction under vibratory power. The hot air passes through fluidized-bed and exchange with raw materials'damp, then the wet air is dusted by cyclone separator and exhausted from air outlet，the d ried material is discharged through finished material outlet.

Overview： Let heat source pass through the sealed Jacket The heat will be transmitted to raw material to be dried through inner shell,Under driving of power,the tank is rotated slowly and the raw material.

Overview： Tt is well known that vacuum drying is to put raw material under the state of vacuum fo r heating and drying If use vacuum to pump air and humidity out，the dry speed will be faster.

Overview： Spray drying is the technology most widely used in the liquid technology s haping and in the drying industry.The drying technology is most suitable for producing solid powder or particle products from liquid materials,such as:solution, emulsion, suspension and pumpable paste states.

Overview： This equipment combines drying and granulating two functions together. According to requirements of producing techniques, pressure ow, spray hole size and ux of liquid material’s nozzle can be adjusted,granuled balls with specic size and ratio are produced.

Overview： The machine adopts full seal from.All parts are made of stainless steel.It is equipped with three grades of lter .The ltered air is one hundred thousand grades.The cooling device of wall is installed at the cylinder body .It makes the wall temperature less than 80 ℃.Air sweeping device is installed inside the drying tower .

Overview： CT-C series hot a ir circulation oven adopts noise elimination and thermal stable axial flow fan and automatic temperature control system. The entire circulation system is enclosed to make that the heat efficiency of the drying oven increases from 3~7% of the traditional drying oven to 35~45% of the present one. The highest heat efciency can be up to 50%.

Overview： Fluidizing drier is also called as fluidized-bed. It consists of air filter , heater ,fluidized-bed main machine, feeder , cyclone separator , cloth bag duster ,high-pressure centrifuge fan and operation table. Because the properties of raw materials exist dif ference, when equip the dust removing equipment, it should consider the practical need. It can select cyclone separator and cloth bag duster at the same time or one of them.

Overview： Purified and heated air is introduced from the bottom through suction fan and passed through the screen plate of raw material. In the work chamber , the state of fiuidization is formed through stirring and negative pressure. The moisture is evaporated and removed rapidly and the raw material is dried quickly.

Overview： This machine is a continuous penetrating flow dryingequipment applied for drying pieces strip and particles state materials with good ventilation. The machine is suitable for the materials such as dewatering vegetable, herbal medicine of traditional chinese medicine and others, for which the water contents are high and high drying temperature is not allowed.

Overview： The belt drier is continuous drying equipment in batch. It is suitable for drying the raw materials that is in the shape of piece, s trip or granule and is good in permeability. Particularly it is suitable for such raw materials that contain high moisture and are not permitted high temperature for example, dehydrated vegetable,catalyst, drinking tablet of Chinese traditional medicine. Its features are fast in drying speed, strong in vaporization, good in quality of products.

Overview： DWC Series Dryer for Vegetable Dehydration is special equipment researched and developed on the basis of traditional net belt drier. It has stronger pertinency, practicability and high efciency of energy. It is wide used for all kinds of vegetables dehydration such as garlic, cushaw, konjak, white radish, yam, bamboo shoot, etc at different region and season.

Overview： QG Series Pulse Air Flow Dryer is a large quantity production drier, it adopt instant drying principle, utilize hot air’s quick move to drive damp raw material and make it oats in the hot a ir, this can strengthen the whole drying process,improve the speed of hot exchange. If raw material is dried by this equipment,non-combined moisture can be removed completely, dried material never metamorphosed, compared with general drier, output is remarkably raised.

Overview： PLG series continuous plate dryer is a kind of high efficiency conducting and continuous drying equipment. Its unique structure and operating principle provide advantages of high heat efficiency , low energy consumption, less occupying area, simple configuration, easy operation and control as well as good operating environment etc.

Overview： It is an innovation horizontal batch-type vacuum dryer.The moister of wet material will be evaporated by heat transmission. The stirrer with squeegee will remove material on hot surface and move in the container to form cycle flow .The evaporated moisture will be pumped by vacuum pump.

Overview： Applicable for drying or cooling of paste, particle, powder and slurry state of material, perform the process of drying, cooling, heating, sterilizing, reacting and combustion under low temperature. The special stirring and heating transferrin gblade, makes high heat transferring ef ficiency, and provide self-cleaning function.

Overview： Wet material is loaded from one head of the dryer , and then it is stirred by the bafflers that is uniformly distributed in the barrel. Material is uniformly distributed and dispersed in the dryer , fully contact the hot air of parallel (or counter) flow ,so the drying process is expedited, and the impulsion power of media transfer is enhanced.

Overview： Drum dryer is a kind of rotating continuous drying equipment with internal heating conducting-style. Certain thickness of materials film a ttach to the drum from material liquid vessel under the drum. Heat is transferred to the internal wall of the cylinder through pipes and then to the external wall and to materials film, to evaporate the moisture in materials film so as to dry materials.

Overview： The damp raw material enters into helix bed from feed inlet at the top and moves along with the helix bed under the function of excited force and gravity material make jumping motion from up to low until discharged at the bottom layer. Meanwhile clean hot air enters into it from the bottom of helix bed and carries out heat exchange with raw material fully and exhausts from the outlet at the top. In this way the drying purpose of damp raw material is reached.